Ductless-Split Harsh-Duty Industrial Air Conditioners

Durable Machinery Company, LLC offers five basic models of ductless-split harsh-duty air conditioners ranging in cooling capacity from 12,000 BTUH (3.5 KW or 1 ton) through 36,000 BTUH (10.6 KW or 3 tons).

For their general characteristics and the special harsh-duty features that they share with all DMC air conditioners, please click here.

I. Additional Special Features

• DMC rates these capacities at and designs the air conditioners for ambient temperatures of 131°F (55°C), not the normal rating temperatures of 95°F (35°C) used by most manufacturers. Since DMC's patented design assures that air conditioners will maintain their full cooling capacities at lower temperatures without fan speed or other active controls, we assure that units can deliver the promised cooling throughout the year in your facilities.
• Low-ambient conditions: These units will maintain their full cooling capacity — or more — from 131°F (55°C) down to 32°F (0°C) without any modifications, and to as low as -40°F/C with adaptation.
• As ambient temperatures fall, the capacity of these air conditioners increases by up to 20-25% above their rated capacities at standard rating temperatures of 95°F (35°C). Even at 120°F (49°C), they will provide substantially more cooling than their rated capacity.
• Thermostats in DMC air conditioners can be adjusted to maintain temperatures inside the cooled space as high as 105°F (41°C) to 110°F (43°C). Therefore, if your building merely needs to be kept from overheating, our air conditioners can substantially reduce energy costs by cooling only when your solvents, explosives, other products, controls or equipment actually need cooling and not force your system to run cooler than necessary.
  In fact, you may be able to utilize a smaller-capacity air conditioner because you will not need to operate it at lower temperatures. A high room temperature will also increase the life of the air conditioner.
• The condensing units of the DMC ductless-split air conditioners can be mounted anywhere with good air circulation near the condensing unit. The standard designs allow for 50 to 100 feet (15 to 30 meters) of tubing connecting the two sections.
• DMC designs the ductless-split units so that each section — the condensing section and the evaporating section — have separate power sources; however, the installer can supply power to either one and then connect a power line between them.
• DMC offers optional 316L stainless-steel support brackets for the evaporating section of its ductless-split air conditioners.

• Sitemap

© 2006 – 2012

Durable Machinery Company, LLC.
63 Flushing Avenue, Unit 236 Building 5-315, Brooklyn, New York 11205 U.S.A.

Tel: (718) 643-5151 Fax: (718) 643-9601